AvCraft Technical Services
A Day in the Life
Deric Inspecting a Do328 PW 306B engine installation.
A Day in the Life
Inspection interior removal.
A Day in the Life
Jonathan on the wing of an ATR 42.
A Day in the Life
Reassembly of a D0328 Propeller.
A Day in the Life
Stan installing rivets on an ATR 42 skin replacement.
A Day in the Life
Marshall inspecting a DHC 8 wing.
A Day in the Life
Jonathan working on an SFAR 88 Modification.
A Day in the Life
Selwyn inspecting an ATR 42.
A Day in the Life
Unricco working a Do328 APU installation.
A Day in the Life
Chris polishing a new paint job.
A Day in the Life
Mike reinstalling a PW 119B engine.
A Day in the Life
Selwyn inspection an ATR 42
A Day in the Life
Cleaner in action.
A Day in the Life
James drilling out rivets from a major skin replacement.
A Day in the Life
Carol and Mindy inspecting the facility.
A Day in the Life
Justine replacing a Dash 8 landing light lens.
A Day in the Life
Robert working findings on an ATR 42.
A Day in the Life
Mike leading Do328 prop installation.
A Day in the Life
Eric assisting with a Do328 Rudder removal for balancing.
A Day in the Life
Mark handling a Dornier 328 fairing.
A Day in the Life
Robert and Wallace reinstalling Do328 interior after completing inspection.
A Day in the Life
Deric installing a Pitot static calibration tool assembly.
A Day in the Life
Wallace removing rubber bolt for rudder removal.
A Day in the Life
Mike cleaning ATR Gear assembly.
A Day in the Life
Steve with Dash 8 Door Inspection in process.
A Day in the Life
Berwin working a structural defect around a Dash 8 fuel panel installation.
